Відео

Thanks for watching!

Thanks, I’m working on some updates. Perhaps you have some ideas re forum.arduino.cc/t/programming-and-uploading-both-portenta-h7-cores-at-once-works/1097935/2?u=bsodmike I’ve found the firmware bin file from PlatformIO is a wee bit when compiled with the Arduino IDE. Trying to figure this out.

You'll need a time machine for that I'm afraid :)

Really? what do you want to see?

@@bsodmike long term stability

Hi Ken, I definitely enjoyed both my 15300 pieces (including the OR version) when I had them. However I later decided to focus mainly on Patek and Rolex - so additions have been in that direction plus another Omega. AP is worth considering as long as you don’t mind several services and repairs and this is something I did not want to continue bothering with given I’ve never had issues with the other brands. I’ve moved back home and the nearest AP service centres are in nearby countries and just not worth the hassle (for me).

Hi JM, in 2018 I picked up a new (at the time) X5 40e Xdrive. This has just been such a great all around vehicle and something highly recommended. Unfortunately where I'm based due to server mis-management/corruption the country's FX resources post-COVID are next to nothing; as such no new cars can be imported by non-Politicians (to save the $$$ leaving the country). There are others easily selling theirs used for ~$80k (not far off from its original cost, as we have very high vehicle taxes here), even which much more milage than mine. We haven't even touched 20,000km but getting close. It's practically in brand new condition.

Thanks Raymond!

Thanks Siva, good to see you here. Best M

Nice to hear from you Frank, all the best. Noted on your preferences :)

Hi Anik. thanks!!

Thanks Saad! Hope I can share some new content soon.

@@bsodmike I hope you don't regret selling some of the hot pieces that you had in the past that have appreciated considerably haha. Good luck 👍

@@saadgandapore not really. At the time I parted with the APs I had moved on to the Patek pieces and am glad I’ve generally moved in that and Rolex as main choices. The latter are great everyday watches and the former are just super special. AP - I need to make a longer video about this, but apart from making a quick buck, not much really appeals to me thanks to decisions made by the brand. Kudos for them making billions by aligning with rappers and Hollywood elite and causing a frenzy on social media. But that’s not the kind of watch hobby I care about. Will elaborate later. Thanks!

Thanks Alistair. Hoping to share more content soon :)

Audio works fine. Check your end please.

The link in your email works fine. Your link in a comment on "EEVblog 1423 - Flaming Magic Repair Smoke!" leads to the broken video. The link is "ua-cam.com/video/_VV9mvuu--Q/v-deo.html" which missing "&lc=UgzpMfaYPMUI0p-x-WR4AaABAg" on the end.

@@bitpit2243 thanks! That’s strange haha!

Hi Frank, I took a different direction and got a Chronograph from Patek. That’s about the only “new” addition apart from changing my older 5146J to a R version.

Care to elaborate further?

Thanks Aranda for the feedback :)

Hey mate. How have you been? Thought of rebooting the channel with some fresh content. Stay tuned!

@@bsodmike I've been well Mike. Been busy these days with our newborn. These videos are therapeutic haha. How have you mounted the overhead camera? Is it a GoPro on a special stand?

@@ravishanf wow congrats! I’ll try share a photo of the setup, but I’ve got the 4K cam on a tripod, with the centre column inverted.

This was the only video in the common strap change for a Patek. I have the same watch , annual calendar , and need to do the same change. Gonna get a 120 size jewelry screw driver

It has grown a bit more. I’ve switched the 5146 to a 5146R in 2019. In December 2019 I picked up a 5170G in Singapore and ~June 2020 bought a second RG DayDate 36mm, this time for my Mum with a full diamond set bezel & Diamond White MOP dial with President bracelet.

@@bsodmike wow congrats on the 5170! And very nice to get that dd for your mom! Is the rose gold 5146 dial identical to the yellow gold version or does the 5146r dial have a creamier look (compared to a whiter 5146j dial)? I am trying to decide which 5146 to get.

@@wristfulthinking Both the J & R have the same opaline dial.

Of course the applied markers and trim around the date-window are respectively J/R.

I don't think there are any, but there might be an odd reference that does. That said my recent Patek acquisition, a 5170G does have hacking seconds.

Frank V there’s been a few new additions as well! Give me sometime, I’ll try and get this done for you!

Hi Aranda, great to hear from you and thanks for the comments. Yes, I've been a fan of flight-sim way back since the first versions of MS flight simulator; that was well back in my early early teens playing other games like F22 raptor and Comanche 'copters. Of course, I didn't take much of it super-seriously back then. With the new Flight Simulator 2020 though it's really amazing to have a play with the A320Neo and the Boeing 777/Dreamliner. At the moment I've been doing my best to master ILS landings with the A320Neo and just been learning about its A-floor stall-protection. The simulator auto-pilot so far does not simulate the combined A1+A2 for automated landings (and there's no fun in that!) so I take it out of autopilot and have been practicing flaring myself. It's not as easy as it looks! I find it's super easy to nail landings in the Daher TBM 900 but then again, it is far more agile. On the topic of watches, I've been sporting the Day-date as my everyday driver. In June I bought Mum an identical piece in Rose gold, 36mm but with the full-diamond bezel and White MOP diamond dial and president bracelet. On the Patek front I'm enjoying the 5146R (I replaced the older yellow-gold piece) and added a 5170G manual-wind Chronograph in December. It's an incredible piece and I'm glad to be able to enjoy it from time to time.

v sam yes @peartickle. Thanks.

First of all, I'd like to thank you for a polite response, which is rare on UA-cam. I completely agree, for any Patek owner, if you have easy access to your boutique/AD, let them adjust and attend to your watch for you. When I last sat with a Patek technician I did not notice him using a cling film; he was just careful and certain with his use of the correct screw-driver. In my personal collection, I only own original Bergeon tools and was careful when working on this deployant strap. In any case, I sold this watch a while ago and replaced it with a 5146R in 2019 -- (I switched from yellow to rose gold). Thanks again for your feedback.